ScrapPS-040
PC Injection Scrap
Injection Grade
Colours: Clear, Natural, Colour
Key specs: MFI, Impact, Moisture
Used in: Automotive, Electrical, Industrial
PC Regrind / Flakes Injection Grade · Regrind / Flakes · Polycarbonate
PC Regrind / Flakes is regrind / flakes PC sourced from reprocessed pc. Regrind (or flakes) is scrap that has been sorted and ground, and often washed, into small pieces. It can go straight into many moulding and extrusion lines, or be pelletised further.
Specifications at a glance
| Polymer | PC (Polycarbonate) |
|---|---|
| Form | Regrind / Flakes |
| Grade | Injection Grade |
| Source material | Reprocessed PC |
| Colours available | Clear, Natural, Colour |
| Specs to agree | MFI, Impact, Moisture |
| Typical uses | Automotive, Electrical |
| Catalogue code | PS-041 |
What to check before you buy
- MFI: Melt flow index (g/10 min) tells you how easily the material flows. Match it to your process: low for pipe and blow moulding, medium for film and raffia, higher for thin-wall injection moulding.
- Impact: Impact strength shows how tough the material is. It matters for crates, automotive parts and anything that is dropped or loaded.
- Moisture: Moisture causes bubbles, silver streaks and weak parts. Ask for the moisture percentage and whether the material needs drying before use.
- Lot check: Ask about flake size, whether it is washed or unwashed, dust and fines, moisture, colour consistency across bags and any mixed polymers. A sample run on your own machine is the best test.
Who buys regrind / flakes like this
Moulders and extruders who can feed regrind directly, and granule makers who want a cleaner feed than raw scrap.
How to get a quote
- Share your need
Quantity, colour, specs and delivery city. - Get quotations
The desk collects quotes from verified suppliers and emails them to you. - Check a sample
Test the actual lot on your machine. - Confirm bulk
Rate, GST, freight and payment terms in writing.
Other PC grades
GranulesPS-042
Recycled PC Granules
Injection Grade
Colours: Natural, Clear, Colour
Key specs: MFI, Impact, Moisture
Used in: Engineering applications
Related guides
Scrap, regrind or granules: which form should you buy?Recycled plastic quality checklist for buyersHow to write a plastic raw material requirement that gets accurate quotes
Need material this week?
Post your requirement and get quotations from verified suppliers, usually within a working day.
Questions buyers ask
What is the price of PC Regrind / Flakes?
Prices for PC Regrind / Flakes move with colour, quality, quantity and the virgin PC market. Post your requirement with quantity and delivery city, and the PlasticSetu desk shares current quotations from verified suppliers, including GST and freight terms.
Which specifications should I check for PC Regrind / Flakes?
Agree MFI, Impact, Moisture with the supplier, ideally with a tolerance and a test report per lot. Ask for photos and a sample of the actual lot before bulk.
What is PC Regrind / Flakes used for?
It is commonly used in automotive, electrical.
Can I get a sample first?
Yes. Mention samples in your enquiry and the desk arranges them before you confirm bulk quantities.