Regrind / FlakesPS-041
PC Regrind / Flakes
Injection Grade
Colours: Clear, Natural, Colour
Key specs: MFI, Impact, Moisture
Used in: Automotive, Electrical
PC Injection Scrap Injection Grade · Scrap · Polycarbonate
PC Injection Scrap is scrap PC sourced from pc parts. Scrap is material as collected: sorted by polymer, grade and colour, but not yet ground or pelletised. It is the lowest-cost way in and suits recyclers who wash, grind and extrude in-house.
Specifications at a glance
| Polymer | PC (Polycarbonate) |
|---|---|
| Form | Scrap |
| Grade | Injection Grade |
| Source material | PC parts |
| Colours available | Clear, Natural, Colour |
| Specs to agree | MFI, Impact, Moisture |
| Typical uses | Automotive, Electrical, Industrial |
| Catalogue code | PS-040 |
What to check before you buy
- MFI: Melt flow index (g/10 min) tells you how easily the material flows. Match it to your process: low for pipe and blow moulding, medium for film and raffia, higher for thin-wall injection moulding.
- Impact: Impact strength shows how tough the material is. It matters for crates, automotive parts and anything that is dropped or loaded.
- Moisture: Moisture causes bubbles, silver streaks and weak parts. Ask for the moisture percentage and whether the material needs drying before use.
- Lot check: Ask for photos of the actual lot, whether it is post-industrial or post-consumer, polymer purity, moisture, and how much label, paper, metal or other polymer is mixed in. Confirm the bale or bag weight and how much loads per truck.
Who buys scrap like this
Recyclers and reprocessors with their own washing, grinding and extrusion lines.
How to get a quote
- Share your need
Quantity, colour, specs and delivery city. - Get quotations
The desk collects quotes from verified suppliers and emails them to you. - Check a sample
Test the actual lot on your machine. - Confirm bulk
Rate, GST, freight and payment terms in writing.
Other PC grades
GranulesPS-042
Recycled PC Granules
Injection Grade
Colours: Natural, Clear, Colour
Key specs: MFI, Impact, Moisture
Used in: Engineering applications
Related guides
Scrap, regrind or granules: which form should you buy?Recycled plastic quality checklist for buyersHow to write a plastic raw material requirement that gets accurate quotes
Need material this week?
Post your requirement and get quotations from verified suppliers, usually within a working day.
Questions buyers ask
What is the price of PC Injection Scrap?
Prices for PC Injection Scrap move with colour, quality, quantity and the virgin PC market. Post your requirement with quantity and delivery city, and the PlasticSetu desk shares current quotations from verified suppliers, including GST and freight terms.
Which specifications should I check for PC Injection Scrap?
Agree MFI, Impact, Moisture with the supplier, ideally with a tolerance and a test report per lot. Ask for photos and a sample of the actual lot before bulk.
What is PC Injection Scrap used for?
It is commonly used in automotive, electrical, industrial.
Can I get a sample first?
Yes. Mention samples in your enquiry and the desk arranges them before you confirm bulk quantities.