ScrapPS-043
Nylon / PA Scrap
Injection / Fibre
Colours: Natural, Black, Colour
Key specs: Moisture, Viscosity, Glass %, Contamination
Used in: Automotive, Electrical, Engineering
Nylon / PA Regrind Injection Grade · Regrind / Flakes · Polyamide (Nylon)
Nylon / PA Regrind is regrind / flakes PA / Nylon sourced from reprocessed pa. Regrind (or flakes) is scrap that has been sorted and ground, and often washed, into small pieces. It can go straight into many moulding and extrusion lines, or be pelletised further.
Specifications at a glance
| Polymer | PA / Nylon (Polyamide (Nylon)) |
|---|---|
| Form | Regrind / Flakes |
| Grade | Injection Grade |
| Source material | Reprocessed PA |
| Colours available | Natural, Black, Colour |
| Specs to agree | Moisture, Glass %, Viscosity |
| Typical uses | Engineering, Automotive |
| Catalogue code | PS-044 |
What to check before you buy
- Moisture: Moisture causes bubbles, silver streaks and weak parts. Ask for the moisture percentage and whether the material needs drying before use.
- Glass %: Glass fibre percentage sets stiffness and strength. Agree the exact percentage and its tolerance.
- Viscosity: Melt or solution viscosity affects flow and strength. Ask how it is measured and what range to expect.
- Lot check: Ask about flake size, whether it is washed or unwashed, dust and fines, moisture, colour consistency across bags and any mixed polymers. A sample run on your own machine is the best test.
Who buys regrind / flakes like this
Moulders and extruders who can feed regrind directly, and granule makers who want a cleaner feed than raw scrap.
How to get a quote
- Share your need
Quantity, colour, specs and delivery city. - Get quotations
The desk collects quotes from verified suppliers and emails them to you. - Check a sample
Test the actual lot on your machine. - Confirm bulk
Rate, GST, freight and payment terms in writing.
Other PA / Nylon grades
GranulesPS-045
Recycled Nylon / PA Granules
Injection Grade
Colours: Natural, Black, Colour
Key specs: Moisture, Glass %, Viscosity
Used in: Engineering, Automotive
Related guides
Scrap, regrind or granules: which form should you buy?Recycled plastic quality checklist for buyersHow to write a plastic raw material requirement that gets accurate quotes
Need material this week?
Post your requirement and get quotations from verified suppliers, usually within a working day.
Questions buyers ask
What is the price of Nylon / PA Regrind?
Prices for Nylon / PA Regrind move with colour, quality, quantity and the virgin PA / Nylon market. Post your requirement with quantity and delivery city, and the PlasticSetu desk shares current quotations from verified suppliers, including GST and freight terms.
Which specifications should I check for Nylon / PA Regrind?
Agree Moisture, Glass %, Viscosity with the supplier, ideally with a tolerance and a test report per lot. Ask for photos and a sample of the actual lot before bulk.
What is Nylon / PA Regrind used for?
It is commonly used in engineering, automotive.
Can I get a sample first?
Yes. Mention samples in your enquiry and the desk arranges them before you confirm bulk quantities.